A quality wood moisture meter is vital to the long-term success of any woodworking project you put together. Lumber mills try to dry their batches of lumber according to the intended end product destination. That is, if the wood is harvested in the wet Northeast, but is going to be shipped to the arid Southwest, it will be dried more than wood kept in the Northeast for use by woodworkers. The success of your woodworking project, from wood flooring to kitchen cabinets to fine furniture, depends on the correct moisture content levels of the woods you use for your area of the country. 

This project actually started with me wanting to build a chair for myself, however I lacked advanced woodworking tools and a workshop. I therefore began making furniture that was as straightforward as possible and could be build easily with simple tools. Most importantly, all parts could be cut at the DIY store where I got my plywood. This meant I didn't need a saw bench or lots of space. The cut parts were easy to transport to my home and I could pretty much build the whole chair on the kitchen table. This inspired me to make other furniture pieces in similar fashion.
After they get empty, we remain no longer concerned with those wooden barrels! If you are having some long-forgotten wooden barrels they time to plan them for restoring living room fashion points! Here is way to convert an old barrel into a stunning coffee table that will also provide a secrete stash as you can see here! Perfect gift for rustic-modern lovers! Here is how to make it artofmanliness
A planer comes into use when the woodworker intends to have flat boards of even thickness. Contemporary machines may have a planning platform that helps achieve accurate thickness more quickly. The woodworker adjusts the platform to set the cutting depth, then feeds the board through the machine. The in-feed roller carries the wood forward as it gets placed under the blades of the cutter drum before being moved out of the machine by the out-feed roller. Some planers have both manual and electronic controls.

Furniture Making engages students in the process of furniture making. Topics include an American historical overview and a look at the use of power and hand tools. Common themes include sketchbook work, cutting, hand tools, power tools, bending and jig making. This course employs various technical readings, visual aids, videos, project pictures and assignments.
I built my coffee table!! I used the plans at www. EasyWoodwork.org to build mine – highly recommended you check those out too. They are detailed and super easy to read and understand unlike several others I found online. The amount of plans there is mind-boggling… there’s like 16,000 plans or something like that for tons of different projects. Definitely enough to keep me busy with projects for many more years to come haha

The first step to building the table is to create the bottom shelf assembly. We used 2×4 boards for this part and ripped the boards to 3” wide each with our table saw. You don’t have to rip your boards on this part, but it will change the overall dimensions, so be sure to make those changes. We made 3/4“ pocket holes around all sides of the plywood panel. We also added 1.5” pocket holes to the ends of each long board. Attach the long sides of the panel to both sides using wood glue and 1.25” pocket hole screws. The plywood for the bottom shelf will be flush with the top of the 2×4 boards.
I built my coffee table!! I used the plans at www. EasyWoodwork.org to build mine – highly recommended you check those out too. They are detailed and super easy to read and understand unlike several others I found online. The amount of plans there is mind-boggling… there’s like 16,000 plans or something like that for tons of different projects. Definitely enough to keep me busy with projects for many more years to come haha 
×